Introduction to Engineering Design (IED) EOC Practice Test

These questions are part of the practice quiz. Start practicing

• Which term refers to the digits in a decimal number that carry meaning contributing to the precision or accuracy?
• Which term is described as a list of materials or parts specified for a project?
• Which term describes a modeling approach that analyzes the geometry's volume rather than just its edges?
• Which term describes a visual, mathematical, or three-dimensional representation in detail of an object or design, often smaller than the original?
• Which statement best describes Aligned Dimensioning?
• What is a Work Axis?
• Which option best describes OSHA?
• What is the name of the line drawn on a drawing to define where a cut is made to create a section plane?
• Which line is used to guide the placement of other lines and shapes?
• What is the purpose of a Decision Matrix?
• Which step in the design process involves constructing and testing a prototype?
• Norms are best described as
• Which term refers to a tolerance that permits variation in both directions from the nominal size?
• Which quantity measures how much matter is packed into a given volume?
• Which option correctly defines proportion in design terms?
• Which statement describes a Perspective Sketch?
• Which drawing type reveals interior features by cutting completely through the object?
• Why do designers need to fully dimension a part?
• Which statement best describes a virtual team?
• Which approach reflects thinking outside the box to create the best possible solution?
• Which statement is true about significant digits?
• What is a sectional drawing that cuts through one-quarter of an object called?
• What does standard deviation measure?
• In drawings, a dimension value enclosed in parentheses often indicates a dimenson used for information only. What is this type called?
• Which term describes the gradual diminution of width or thickness along the length of an elongated object?
• Which term defines constant, non-numerical relationships between the parts of a geometric figure, such as parallelism or perpendicularity?
• Ratio is best described as?
• Which term defines the amount of 3-dimensional space occupied by an object?
• Which statement best describes a histogram?
• Which organization is a private, non-profit organization that coordinates standards in the United States?
• Which term matches the definition: The state of being noticeably different from something else when put or considered together?
• Which operation would you use to create a solid of revolution from a profile?
• Which pictorial representation uses depth at full scale relative to height and width?
• Which term is used to indicate where the cutting plane line has cut through material in a drawing?
• Which elements are identified in a design brief?
• Circumscribe means to do which of the following?
• What is a Work Plane in design terms?
• Which activities are part of generating potential solutions?
• Which term describes a full-scale working model used to test a design concept by making actual observations and necessary adjustments?
• In a black box representation, what is typically assumed about the internal components?
• Rib refers to which of the following?
• Which term is the value that occurs most frequently in a data set?
• Which term is defined as a dimension that repeats a given dimension or is established from other values shown on a drawing, and is typically enclosed in parentheses?
• Reverse Engineering is the process of taking something apart and analyzing its workings in detail.
• Which term describes the degree of closeness of measurements to the actual value?
• A dimension, usually without a tolerance, used for information purposes only and often enclosed in parentheses on the drawing is called:
• What is research?
• OSHA's mission includes...
• Which term describes a triangle that has a 90 degree angle?
• What term best describes an engineering notebook?
• Isometric Sketch is defined by which property?
• What is an Auxillary View used for?
• Volume is defined as which of the following?
• Which view shows details not obvious on the exterior of the part?
• Which of the following is NOT one of the six steps in the design process?
• What advantage does CAD provide over traditional paper and pencil design?
• Which of the following is NOT listed as an engineering discipline in the material?
• What is a design brief?
• Which statement explains why realistic sketches boost design competence?
• Chain Dimensioning is commonly known as:
• Which instrument is best described as having two adjustable jaws used to measure distance or thickness?
• Which projection method represents three-dimensional objects on a plane having only length and breadth?
• Which pictorial represents depth as half scale compared to height and width?
• Which sections comprise the Back Matter of a technical report?
• Density is defined as which of the following?
• Color is defined as the property possessed by an object of producing different sensations on the eye due to the way it reflects or emits light. Which term is this?
• In a CAD program, how is a geometric constraint different from a numeric constraint?
• Which term describes a CAD modeling method that uses parameters to define the size and geometry of features?
• Exploded Assembly refers to an assembly drawing where components are separated along an axis to reveal how parts fit together. Which term describes this?
• What is Countersink?
• What is the purpose and what are the sections of a technical report?
• Which term describes the systematic use of mathematics to analyze data and guide decisions?
• Which portfolio page typically indicates how components fit together and shows assembly relationships via exploded view?
• Which term describes a CAD modeling method that uses parameters to define the size and geometry of features and to create relationships between features? Changing a parameter value updates all related features of the model at once.
• Which term describes the degree to which repeated measurements show the same result?
• Which term describes a repeated decorative design?
• Which construction feature defines a point in three-dimensional space and can be incorporated into dimension and constraint schemes?
• Which view is used to magnify features that are too small to specify in other views?
• Which term is the study of designing workplaces to maximize safety and efficiency?
• What is an offset and how is it used?
• Which term defines the acceptable amount of dimensional variation that will still allow an object to function correctly?
• What is the process of a portfolio? How do what information to include in a portfolio?
• What term refers to a hole that does not go completely through the workpiece?
• Which option correctly defines statistics in engineering data analysis?
• Which term refers to the feel, appearance, or consistency of a surface, substance, or fabric?
• Which term defines a repeated decorative design?
• What is Technical Writing?
• Which line is used to represent the visible edges of an object on a technical drawing?
• What does the International Organization for Standardization do?
• In sketching, what does proportion refer to?
• What is a Parts List?
• What is Market Research?
• What is the difference between the largest and smallest values in a data set?
• What are the three spatial dimensions typically used in engineering drawings?
• Which term describes a triangle with one angle greater than 90 degrees?
• In reverse engineering, what is the primary purpose of using a black box systems model?
• Principal Axes refer to which concept?
• Which statement describes a normal distribution correctly?
• How can we use technology to make the design and manufacture of a product more efficient and less prone to error?
• Which line represents where a dimension starts and stops?
• What term describes 'Special importance, value, or prominence given to something'?
• Why would you have to know how to convert measurements when looking at a technical drawing?
• Which term describes the degree to which repeated measurements show the same result?
• Which term describes attributes such as material and density, i.e., physical properties?
• Which term describes a tolerance in which variation is permitted in both directions from the specified dimension?
• Which sketch is typically used to convey depth using perspective with vanishing points?
• OSHA's responsibilities include
• What is a Work Point?
• Which statement best defines asymmetry in design?
• Which term refers to the nominal size designation used for a commercial product?
• What is a Pictorial Sketch?
• What is the role of models in the design process?
• What is one of the four best practices for the Engineering Notebook?
• What term best describes the Engineering Notebook's role in patent activities?
• Which dimensioning system requires all dimensions to be placed from a datum rather than feature to feature?
• Which line is lightly drawn to guide drawing other lines and shapes?
• Tonal shading refers to what in a sketch or map?
• Which line type would you use to show hidden features behind surfaces?
• What constraint would you use to place a pin inside a hole?
• Tangent is defined as which of the following?
• Which sequence correctly lists the three steps of reverse engineering?
• Which term refers to an enlarged or reduced representation used for examination and study?
• Which of the following is the first step in the design process?
• Which of the following is a best practice for the Engineering Notebook?
• Which concept describes the lines of intersection created from three mutually perpendicular planes?
• Which term describes the relationship of parts to a whole in size or quantity?
• Graphic Design is defined as which of the following?
• What are Section Lines used for?
• Tapped Holes are defined as which?
• Which term describes an enlarged or reduced representation of an object that is usually intended for study purposes?
• Which statement best describes a geometric constraint in CAD?
• Color in design is defined as which of the following?
• Which term refers to drawings that convey all of the information needed to manufacture and assemble a design?
• Which statement best describes design?
• A location dimension defines the relationship of features of an object. What is this type of dimension called?
• Which line is a heavy solid line used to depict the outline of an object?
• Which term describes symmetry about a central axis?
• Which items are typically included in the Front Matter of a technical report?
• Phantom Line is best described as which option?
• Which line indicates dimensions of arcs, circles and detail?
• In reverse engineering, which analysis focuses on what a product looks like and how it appears?
• Which term describes a dimension that repeats a given dimension or is established from other values shown on a drawing, typically enclosed in parentheses?
• Ethics are...
• Which line is used to indicate the center of symmetry for arcs and circles?
• Rhythm in design refers to which concept?
• Which term describes a line that extends forever in two directions and is useful for locating the center of a hole or cylinder?
• What is a constraint?
• What is a subassembly?
• What is a design brief used for?
• Which term refers to the curve formed at the interior intersection between two or more surfaces?
• What best defines a design statement?
• Emphasis in design refers to
• Which statement best describes the use of a prototype?
• What is the difference between a mate constraint and a flush constraint in CAD modeling?
• Baseline Dimensioning is also referred to as:
• Which drawing contains views projected onto two or more orthographic planes?
• Which term describes a sectional drawing based on a cutting plane line that extends completely through the object?
• Rhythm refers to the regular recurrence of visual elements that guides the viewer through a composition. Which term is this describing?
• Which term is a type of 3D CAD modeling that represents the volume of an object, not just its lines and surfaces, allowing analysis of mass properties?
• Which sketch represents an object with true width and height, while the depth can be any size and drawn at any angle?
• Which term describes the process of choosing and using appropriate mathematics and statistics to analyze empirical situations, understand them better, and improve decisions?
• How does the material chosen for a product impact the design of the product?
• Which graph is most suitable for showing frequency distribution of numerical data?
• Which term defines the tightest possible fit between two mating parts?
• Centroid is best described as which of the following?
• Which statement describes symmetry in design?
• Which term describes a design that ensures a clearance always results when mating parts are assembled?
• What is the primary purpose of performing dimensional analysis on a part?
• What term defines the two-dimensional contour that characterizes an object or area, in contrast to three-dimensional form?
• Which option best describes an engineer?
• Which statement best describes a tapped hole?
• Which organization coordinates the development and use of voluntary consensus standards in the United States?
• Center of Gravity is defined as which of the following?
• Which approach reflects outside-the-box thinking to solve problems?
• What is the purpose of sketching ideas?
• Which of the following is a consequence of over-dimensioning a sketch?
• Which statement best describes ethics?
• Which term means to add explanatory notes to a drawing?
• Which drawing contains all the information necessary to manufacture one part?
• Which study focuses on designing workplace equipment to maximize safety and efficiency?
• What is the designation of the size established for a commercial product?
• Which term describes drawing a figure inside another so that their boundaries touch but do not intersect?
• What is the primary purpose of sketching ideas?
• Which statement best defines a virtual team?
• OSHA achieves its mission through...
• Which description best defines engineering?
• How is Brainstorm best defined?
• Which term describes the lightness or darkness of a color in relation to a scale from white to black?
• Which statement best defines an acute triangle?
• What term describes the gradual reduction in width or thickness along the length of an elongated object?
• Graphic Design primarily involves combining which elements?
• Norms differ from laws in that they are...
• Which concept is a 3D point where the total weight may be considered concentrated?
• In a team, norms function to...
• Which term refers to a part or element of a larger whole?
• Which term would you use to describe a three-dimensional representation used for physical testing and evaluation of form and fit?
• What is an engineering notebook?
• Balance in visual design is best described as which of the following?
• Which portfolio page is used to show how components fit together and assembly relationships?
• What is a prototype?
• Which term refers to the property of a system whose value determines how the system will behave?
• Why do engineers perform reverse engineering on products?
• What is the role of constraints in a design brief?
• Which term describes balance where elements are mirrored across a central axis?
• What is the term for the amount of overlap that one part has with another when assembled?
• Which term means symmetry about a central axis?
• Which term describes the US federal agency dedicated to protecting human health and the environment?
• Which line type represents an edge that is not directly visible?
• What feature could be used to create a 3D representation of a baseball bat that was created on a wood lathe?
• What is the term for a section of an object that is broken away to reveal an interior feature for a sectional drawing?
• Which line defines the centers of arcs, circles, or symmetrical parts?
• Norms are...
• Which term describes the center of distribution: mean, median, and mode?
• What measuring instrument having two adjustable jaws typically used to measure distance or thickness?
• Why is placement of dimensions important?
• Angled surfaces can be dimensioned using what methods?
• In data analysis, which term describes how far data values are spread from the center of the distribution?
• Which line represents distance between two points or features?
• Which term is a measure of center in a set of numerical data?
• What does it mean when a sketch is over dimensioned?
• How can statistical and analyzed data be used to inform, justify, and validate a design or process?
• Ethics influence conduct by...
• Which view would you choose to show details not visible on the exterior?
• Which term is used to describe a curved transition between two surfaces?
• Which term refers to a collection of drawings that provide instructions to manufacture and assemble a product?
• Which type of drawing is used to show the material, size, and shape of a product for manufacturing purposes?
• Which feature is placed to seat a bolt head or nut by creating a cylindrical recess around a hole?
• Which term describes the surface feel or texture?
• The primary reliance of a virtual team is on
• Which sections are typically found in the main Text of a technical report?
• A Multi-View Drawing is best described as?
• Which term refers to the activity of gathering information about consumers' needs and preferences?
• Which term describes a physical representation of an object; prototypes and appearance models are examples?
• Which 3D CAD function could be used to create a wire paper clip?
• Which pictorial represents height, width, and depth at full scale?
• Which term represents the geometric center of a solid?
• Differentiate invention from innovation.
• Which drawing type projects views onto two or more orthographic planes?
• What shape characterizes a normal distribution?
• Which term describes the quantitative relation between two amounts showing how many times one value contains the other?
• In design, Form is best described as which option?
• Why do engineers generally adhere to a set of dimensioning standards and guidelines?
• What is a cylindrical recess around a hole, typically to receive a bolt head or nut?
• Which term is used for a view that provides a magnified look at a small feature?
• Which description best defines statistics in engineering data analysis?
• Phantom Line is used to show alternate positions without interfering with the main drawing. Which option best describes Phantom Line?
• Which characteristic is typical of a virtual team?
• Which statement describes standard deviation in data sets?
• Which organization is a worldwide body that creates engineering standards?
• Which sketch is defined by depth that can be any size and drawn at any angle?
• Which organization is known for setting codes and standards for mechanical devices in the United States?
• What do you need to know in order to perform a physical property analysis?
• What needs to be addressed in a Design Brief?